基于灯光数据的京津冀城市多标度异速分析     

龙玉清  陈彦光 《地理科学进展》2019,38(1):88-100

城镇体系的时空演化是一个复杂的动力学过程,具有无尺度性,其特征可以采用异速标度指数定量描述。论文以京津冀为例,基于1992—2013年夜间灯光数据的校正结果,提取城镇夜间灯光信息,采用多标度异速分析方法,分析京津冀城镇体系的相对发展特征及其空间分异格局。研究发现：①京津冀大城市的增长空间局限日益显著。虽然大城市如京津唐的绝对发展水平高,但接近环境承载量的极限,22 a间增长快速的是大城市交接地带的小城市(如三河、迁安、廊坊等)。②相对增长速度快的城市从东北到西南呈现带状分布——政府选择发展的“雄安新区”就在这个轴带上。由此可以得出两个结论：其一,京津冀城市演化的趋势相对均衡化,空间结构异质性逐步减弱,整个城镇体系的发展趋于相对平衡状态;其二,大、小城市“两极”贯通或许是增强城镇体系功能的有效途径。京津冀的空间格局优化不能仅仅考虑主要的、规模大的中心城市,而应该基于等级结构协调整个城镇网络体系。  相似文献   

VIIRS/DNB夜间灯光月度产品插补方法对比——以北京为例     

陈慕琳  蔡红艳 《地理科学进展》2019,38(1):126-138

新一代VIIRS/DNB(Visible Infrared Imaging Radiometer Suite Day/Night Band)夜间灯光数据因其具备更精细的时空分辨率、数据不存在饱和现象、不同年份数据可比性强等优点而迅速代替DMSP/OLS(Defense Meteorological Satellite Program's Operational Linescan System)夜间灯光数据成为新的研究热点。但由于杂散光的污染,VIIRS/DNB夏季数据数值缺失严重,致使数据在空间和时间上不连续,因此,插补缺失数据成为后续应用的前提。鉴于此,论文从插补结果异常值、与参照值对比、计算性能三个方面,系统比较了三次样条插值(样条)、三次Hermite插值(Hermite)、灰色预测模型(GM)、三次指数平滑法(指数)4种插补方法的适用性,以期为插补VIIRS/DNB夜间灯光数据提供方法选择的依据。研究结果表明：①异常值比较方面,Hermite法未出现异常值,另外3种算法仅出现少量异常值(0.02%~1.34%);②与参照值的对比方面,Hermite法与参考值接近程度最高,GM接近程度最低,样条法和指数法介于两者中间;③算法性能比较方面,4种方法都具备计算简单、容易编程的特点,但指数法的算法时长是另外3种方法的10倍以上。因此,综合多方表现,当插补月份前后两侧均有足够长的原始数据时,插补效果好、计算速度快、不会出现过冲现象的Hermite法最适宜,样条法次之;当插补月份仅单侧有足够长的数据时,适宜采用指数法(插补效果好、计算速度较慢)或GM(插补效果偏低、计算速度快)进行插补。  相似文献   

Petrophysics and mineral exploration: a workflow for data analysis and a new interpretation framework     

Michael Dentith  Randolph J. Enkin  William Morris  Cameron Adams  Barry Bourne 《Geophysical Prospecting》2020,68(1):178-199

As mineral exploration seeks deeper targets, there will be a greater reliance on geophysical data and a better understanding of the geological meaning of the responses will be required, and this must be achieved with less geological control from drilling. Also, exploring based on the mineral system concept requires particular understanding of geophysical responses associated with altered rocks. Where petrophysical datasets of adequate sample size and measurement quality are available, physical properties show complex variations, reflecting the combined effects of various geological processes. Large datasets, analysed as populations, are required to understand the variations. We recommend the display of petrophysical data as frequency histograms because the nature of the data distribution is easily seen with this form of display. A petrophysical dataset commonly contains a combination of overlapping sub-populations, influenced by different geological factors. To understand the geological controls on physical properties in hard rock environments, it is necessary to analyse the petrophysical data not only in terms of the properties of different rock types. It is also necessary to consider the effects of processes such as alteration, weathering, metamorphism and strain, and variables such as porosity and stratigraphy. To address this complexity requires that much more supporting geological information be acquired than in current practice. The widespread availability of field portable instruments means quantitative geochemical and mineralogical data can now be readily acquired, making it unnecessary to rely primarily on categorical rock classification schemes. The petrophysical data can be combined with geochemical, petrological and mineralogical data to derive explanations for observed physical property variations based not only on rigorous rock classification methods, but also in combination with quantitative estimates of alteration and weathering. To understand how geological processes will affect different physical properties, it is useful to define three end-member forms of behaviour. Bulk behaviour depends on the physical properties of the dominant mineral components. Density and, to a lesser extent, seismic velocity show such behaviour. Grain and texture behaviour occur when minor components of the rock are the dominate controls on its physical properties. Grain size and shape control grain properties, and for texture properties the relative positions of these grains are also important. Magnetic and electrical properties behave in this fashion. Thinking in terms of how geological processes change the key characteristics of the major and minor mineralogical components allows the resulting changes in physical properties to be understood and anticipated.  相似文献   

Prestack data enhancement with phase corrections in time-frequency domain guided by local multidimensional stacking     

Andrey Bakulin  Dmitri Neklyudov  Ilya Silvestrov 《Geophysical Prospecting》2020,68(6):1811-1818

We present a new approach to enhancing weak prestack reflection signals without sacrificing higher frequencies. As a first step, we employ known multidimensional local stacking to obtain an approximate ‘model of the signal’. Guided by phase spectra from this model, we can detect very weak signals and make them visible and coherent by ‘repairing’ corrupted phase of original data. Both presented approaches – phase substitution and phase sign corrections – show good performance on complex synthetic and field data suffering from severe near-surface scattering where conventional processing methods are rendered ineffective. The methods are mathematically formulated as a special case of time-frequency masking (common in speech processing) combined with the signal model from local stacking. This powerful combination opens the avenue for a completely new family of approaches for multi-channel seismic processing that can address seismic processing of land data with nodes and single sensors in the desert environment.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Analysis of Anomalous Characteristics of Regional Crustal Deformation before the September 16th, 2019 Zhangye MS5.0 Earthquake, Gansu, China     

MA Haiping  WANG Qian  ZHANG Bo  WU Shanyi  WANG Pengtao  DOU Xiying  LI Minjuan 《中国地震研究》2020,34(2):210-218

To study the crustal movement in the vicinity of the epicenter before the Zhangye M_S5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye M_S5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.  相似文献   

南京地电阻率长趋势变化与区域应力调整的关系研究          下载免费PDF全文

王丽  叶青  周康雅  丁烨 《地震工程学报》2020,42(1):143-149,214

江苏南京台北南测道2013—2016年年初出现了与邻近的南京江宁台同步的地电阻率长趋势上升变化,2016年的年中出现了与江宁台和稍远距离的江苏高邮、新沂台同步的趋势下降变化。本文用年变形态、消除年变等数据处理方法并联系该区降雨量分析了南京台等地电阻率长程观测数据,基于视电阻率变化与地下介质内部骨架电阻率ρ°、裂隙水电阻率ρf、裂隙率ν之间的本构关系讨论了地电阻率趋势变化的原因,得到:该台南北向测道地电阻率趋势上升变化起因于台站及周边区域性地下介质的应力调整过程,动力来源可能是本区域地壳局部构造运动。  相似文献   

基于自然间断点分级法的土地利用数据网格化分析   总被引：4，自引：0，他引：4  

李乃强  徐贵阳 《测绘通报》2020,(4):106

土地利用在自然资源统一管理中扮演着重要角色，面对不同区域和年份的数据，统一分析比对口径尤为重要，同时也应反映出相互之间的差异。本文以宜兴市2009年和2017年土地利用现状数据为数据源，首先使用统一的分类标准提取用地类型中的3大类，通过不同大小的单元划分尝试和结果分析，发现适用于该数据的网格尺度大小；然后基于自然间断点分级法进行分级范围划定，对宜兴市三类用地类型的分布和变化趋势进行综合分析，较为真实地反映了宜兴市用地情况；最后通过选用合适的空间尺度和分级范围划定方法，进而构建一个兼具操作性和科学性的土地利用数据网格化方法，为自然资源部门统筹管理和综合治理提供依据。  相似文献   

地面沉降监测多源数据融合分析   总被引：2，自引：1，他引：1  

刘胜男  陶钧  卢银宏 《测绘通报》2020,(12):46-49

地面沉降是区域性地面高程下降的一种地质现象，一般是由自然因素和人为因素的共同作用导致的。目前地面沉降监测的方法很多，各有优劣。本文结合武进中心城区地面沉降监测系列工程案例，对不同沉降监测方法产生的多源数据进行了分析、对比和融合，使成果兼具各种方法的优点，其不仅能更好地描述地面沉降的现状及预测地面沉降的发展趋势，而且可为后期地面沉降监测提供更加准确且丰富的数据基础。  相似文献   

不同测站点云数据的配准算法     

高益忠 《北京测绘》2020,(2):180-184

随着三维激光扫描技术的发展,利用三维激光扫描仪采集信息,构建三维模型成为了热门的课题。由于受到观测环境、观测方向等影响,无法一次性地获得物体的所有的点云数据。因此,不同视角下点云数据的配准成为了三维建模中的关键技术,直接影响了最终的重合结果以及模型精度。本文着重研究主方向贴合法和最近点迭代算法(ICP算法),基于matlab平台编写算法,并对算法进行研究,得出配准结果以及配准精度。  相似文献